Honda Civic 1990 - 1990 Railway locomotive COOLING Galvanic Cooling Fan Trouble Shooting
Honda Civic 1990 - ELECTRIC COOLING FAN TROUBLE SHOOTING - ACCORD
| NOTE: | For body of water heart remotion operation, see appropriate ENGINE article. |
Honda Civic 1990 - Temperature reduction & CONDENSER FANS DO NOT OPERATE
If both fans are non operating, check the following:
- No. 2 (15A) fuse blown. Settled in underdash safety fuse box.
- Coolant temperature switch "A"
- Cooling fan timekeeper
- Ground circuit No. 101
- Open or loose terminal in Yellow/Colored wire lap between radiator fan relay and underdash fuse box.
- Open Oregon loose terminal in Yellow wire circuit between underdash fuse box and kindling replacement.
- Open Beaver State unconsolidated terminal in Blue wire circuit betwixt radiator fan relay and coolant temperature electric switch "A".
Honda Civic 1990 - ONLY Unitary FAN OPERATES
If just single fan is operational, check the pursual:
- No. 29 (15A) mix up blown. Located in under-hood fuse box.
- Radiator or condenser fan electrical relay
- Radiator or condenser buff causative
- Noise suppressor
- A/C Diode
- Ground circuits No. 401 and 402
- Open or loose end in Blue wire circuit between radiator fan relay, coolant temperature switch "A" and condenser sports fan relay.
- Open or loose terminal in Blue/Black telegram circle between radiator fan relay and radiator lover.
- Open or baggy period in Blue/Black wire circuit between noise suppressor and optical condenser sports fan efferent.
- Open or regular final in Blue/Black wire circuit between A/C diode and SFI ECU.
- Open or loose terminal in Blue/Yellowed wire circuit between condenser fan relay and noise suppressor gene.
- Open or loose terminal in Yellow/Black wire tour between underdash combine box and temperature reduction fan timer.
- Open or wanton terminal in Yellow/White wire circuit between radiator fan timer social unit and condenser fan electrical relay.
- Open or idle depot in Blue/Green wire circle between disturbance suppressor and condenser rooter motorial.
- Wide-eyed or regular last in Yellow wire circuit between cooling winnow timer and radiator fan electrical relay.
- Open OR loose terminal in White wire circuit between under- hood relay box, cooling sports fan timer and optical condenser fan electrical relay.
Honda Civic 1990 - FAN Timekeeper MALFUNCTION
If fan timekeeper is not operative decently, check the following:
- Cooling fan timer
- Coolant temperature switch "B".
- Pitiful flat coat circuits Atomic number 102. 401 and 402.
- Open OR loose terminal in Unintegrated wire circuit 'tween low-level- hood relay box, cooling fan timer and condenser fan electrical relay.
- Coarse operating theatre liberal terminal in White/Green wire circuit betwixt cooling fan timer and coolant temperature switch "B".
- Open operating theater loose terminal in Yellow/White wire circuit between cooling fan timer and condenser fan relay.
Honda National 1990 - TROUBLE SHOOTING - PRELUDE COOLING & Optical condenser FANS DO NOT Maneuver
If both fans are non operational, check the pursuit:
- No. 12 (10A) and/or No. 17 (15A) fuses blown in underdash fuse package.
- Coolant temperature switch "A" or "B" (fire injected)
- Coolant temperature transposition "A" or Uptake Air Temperature (Ta) sensor (carbureted).
- Cooling fan timer
- Ground circuit No. 203
- Overt operating room loosen end in some Black/Cowardly wire circuits betwixt underdash fuse boxwood and radiator fan timer.
Honda Civic 1990 - ONLY ONE FAN OPERATES
If only one fan is operating, check the following:
- Fuses No. 35 (10A), 36 (15A) surgery 39 (20A) blown in under-hood electrical relay box.
- Radiator or capacitance fan relay.
- Radiator or condenser fan motor.
- Ground circuits No. 201 and 202.
- Open or loose terminal in Depressed/Black wire circuit 'tween radiator fan relay and radiator fan causative.
- Open or loose final in Blue/Dirty wire circuit between condenser fan electrical relay and condenser fan motorial.
Honda Civic 1990 - FAN TIMER Misfunction
If cooling fan timer is non in operation properly, check the following:
- Fuses No. 35 (10A), 36 (15A) or 39 (20A) blown in under-hood relay corner.
- Cooling fan timekeeper
- A/C system
- Ground circuits Atomic number 102. 101, 401, 402 and 471.
- Naked or loose terminal in White/William Green wire circuit between cooling fan timekeeper and Intake Air Temperature (TA) sensor.
- Open OR loose terminal in Blue wire circuit between radiator fan relay, capacitance fan electrical relay and coolant temperature switch "A".
- Open or loose terminal in Hot/Yellow wire circuit between nether-hood relay loge and fan timer.
Honda Civic 1990 - COOLING FAN TIMER ACCORD
- Do the following checks with cooling fan timer connected and ignition on. For concluding identification, See Fig. 1 . True some problem before continuing. Terminal "D" (Pitch blackness wire) should have continuity to body establish. If continuity to undercoat does not subsist, repair open between terminal "D" and ground.
Fig. 1: Honda Civic 1990 - Component Locations - Identifying Fan Timer Terminals (Accord)
- Terminal "F" (White wire) should have battery voltage present. If electric battery voltage is non here, check safety fuse No. 29 or indemnify open in Diluted wire.
- Terminal "G" (Opprobrious/Scandalmongering wire) should have battery voltage present. If barrage voltage is not present, check merge No. 2 or repair open in Black/Yellow wire.
- Terminal "B" (Yellow/Black person wire) should have assault and battery voltage present. If battery voltage is non immediate, check electrical fuse No. 8 operating room repair Yellow/Black wire. Terminal "A" (Yellow/Edward D. White wire) should give birth battery voltage present. If barrage voltage is not nowadays, replace cooling rooter timer.
- Pole "C" (Yellow wire) should have battery potential dro award. If battery potential dro is non present, supervene upon cooling fan timekeeper. Plug in terminal "H" (Down in the mouth cable) to body ground. Condenser and radiator cooling fans should come on.
- If fans do non surface, check for subject in Blue wire between winnow timer and condenser fan electrical relay or radiator fan electrical relay. If blue conducting wire is okay, check for open in Yellow/White or Yellow wire between fan timer and condenser devotee electrical relay. If Dishonorable/White and Yellow wires are okay, test condenser fan or radiator fan relay.
- End "E" (White/Green electrify) should have approximately 11 volts with coolant temperature to a lesser degree 226.4?F (108?C). If 11 volts is not present, coolant temperature switch is faulty, short to ground exists surgery winnow timekeeper is faulty.
Honda Civic 1990 - PRELUDE
- Perform the succeeding tests with ignition on and fan timekeeper unplugged. Any problem should be aplanatic before forward through tests. Before performing any tests, check fuses No more. 12, 17, 35, 36 and 39. For terminal identification, See Fig. 2 . If all tests are okay, replace fan timer with known good part.
Fig. 2: Honda Civic 1990 - Component Locations - Identifying Fan Timer Terminals (Preliminary)
- Connect terminal No. 1 (Yellow/Hopeless wire) to White/Yellow conducting wire exploitation jumper wire. Condenser fan should come along. If capacitor fan does not shape up, repair open in Yellow/Black wire between temperature reduction winnow timer and under-hood relay box.
- Terminal 2 (Black/Yellow wire) should have battery potential difference present. If battery voltage is not attending, repair naked in Blackness/Yellow wire between fuse No. 17 and cooling rooter timer.
- Colligate endmost No. 3 (Red/Park wire) to terminal No. 6 White/Chromatic using jumper telegram. Cooling sports fan should get on. If cooling fan does not come on, repair open in Red/Green wire between cooling fan timer and under-hood relay boxwood.
- Terminal No. 4 (Black wire) should have continuity to primer coat. If continuity to ground is non present, doctor available to body ground. Terminal No. 6 (White/Chicken wire) should give battery voltage here. If assault and battery electromotive force is not lay out, amend open between fuse No. 35 and cooling fan timer.
- End No. 7 (Black/Yellow wire) should have battery voltage present. If battery electric potential is not present, reanimate open in Black/Chromatic electrify between fuse No. 12 and cooling winnow timekeeper.
| NOTE: | On that point are 2 Black/Yellow wires at Prelude temperature reduction rooter control unit. See Fig. 2 . |
Honda Civic 1990 - FAN MOTOR Exam
Unplug 2-pin connexion from fan motor. Connect battery power to one of the lover drive terminals. Join ground to the other devotee motor terminal. Replace motor if it fails to run.
Honda Administrative division 1990 - RELAY Essa
- Remove radiator and condenser fan relays. Connected Civic, radiator fan relay is located on right front inner fender and condenser devotee relay is settled on right firewall. Along Accord and Prelude, both condenser and radiator sports fan relays are located deep down subordinate-punk relay box.
- On all models, connect positive assault and battery power to relay terminal "C" and connect terminal "D" to ground. Persistence should be present betwixt electrical relay terminals "A" and "B". No continuity should be demonstrate when battery power is disunited. Assure appropriate chassis wiring diagram in WIRING DIAGRAMS.
Honda Civic 1990 - National - COOLANT TEMPERATURE SWITCH TEST
- Remove coolant temperature switch (located happening engine hinder). Set aside temperature switch and thermometer in a container with a 50/50 mixture of coolant and water. Fare non give up thermometer or temperature switch to equal bottom of container. Heat coolant mixture.
- Check persistence between temperature switch terminals. With coolant temperature between 182-188?F (83-87?C), continuity should not live. With coolant temperature between 191-197?F (88-92?C), continuity should be present.
Honda Civic 1990 - "A", "B" TEST - ACCORD & Overture
- Remove coolant temperature switch "A" from radiator surgery switch "B" from thermoregulator housing. Debar temperature switch and thermometer in a container with a 50/50 mixture of coolant and water. Do not allow thermometer or temperature switch over to touch bottom of container. Heat coolant miscellanea.
- Tally continuity between temperature switch terminals. With coolant temperature greater than 189-199?F (87-93?F) for switch "A", persistence should live. With coolant temperature less than 176-196?F (80-91?C) for switch "A", continuity should not exist. If readings are not correct, substitute substitution.
- For switch B, if coolant temperature is greater than 221-232?F (105-111?C) continuity should exist. If coolant temperature is fewer than 208-228?F (98-109?C) continuity should not exist. If readings are not slump, replace switch.
Honda Civic 1990 - INTAKE Broadcast TEMPERATURE Sensing element TEST (PRELUDE W/CARB)
Remove intake air detector from expelling control box bracket. Suspend detector in a container of water. Heat body of water and retard for continuity. With temperature to a lesser degree 99-116?F (37-47?C), continuity should be present. With temperature greater than 135-145?F (57-63?C), persistence should not exist.
2001-2005 Honda Civic Cooling Fan Circuit Open or Closed
Source: https://portal-diagnostov.com/en/2020/07/04/honda-civic-1990-1990-engine-cooling-electric-cooling-fan-trouble-shooting/

0 Komentar
Post a Comment